The sub-ohm tank is the upper part of your electronic cigarette. It usually unscrews from your battery. There is a screw thread for this purpose. You just have to unscrew it. It is this sub ohm tank that will generate the vapor that you will inhale.
How Is A Sub-ohm tank Made?
A sub-ohm tank is composed of a reservoir. A resistance screwed on a base and a drip tip. The tank can be small or large. The tile that constitutes it is most often in pyrex glass (transparent, which allows the product to be seen), but it is also found in plastic on specific models. Note that it is possible to change your atomizer’s glass when it breaks; in general, all pyrex glasses are replaceable or possible to protect it with a ring (plastic ring). Also, the silicone gaskets make it possible to seal the atomizer and prevent any leaks. Choosing the best sub-ohm tank 2021 is essential there.
The resistance is generally screwed to the base but can also be just inserted into the sub-ohm tank. You will find different resistors with different ohms in order to adjust the setting according to your vaping desires. The composition of a resistor is simple, and it is a resistive wire (coil or dual coil) and more often called a wick surrounded by cotton.
The drip tip is placed at the top of your atomizer. It can be of different shapes and materials. It is through this that you will inhale the vapor produced by your electronic cigarette. This mouthpiece will allow a more pleasant inhalation.
How Does An Electronic Cigarette Sub-ohm tank Work?
For your sub-ohm tank to be functional, you first need E-liquid and a coil in good condition. The liquid will soak the cotton present in your resistance, and then it will heat up when you press the start button on your battery and produce steam. You will inhale this vapor through the drip tip.
How To Fill Your Sub-ohm tank?
Depending on the sub-ohm tank you have chosen, there are two ways to fill it:
On some sub-ohm tank, you introduce the E-liquid from the top, either by twisting the upper part of the sub-ohm tank or by pushing the upper part of your atomizer, generally indicated by an arrow. This second solution is generally more practical.
In the other case, the filling will be done from the bottom of your sub-ohm tank. You will then have to unscrew the sub-ohm tank from your battery and subsequently unscrew your sub-ohm tank’s lower base to reach the tank.
How To Choose My Sub Ohm Tank For E-Cigarette?
To choose the right sub-ohm tank, you should know that there are three families of sub-ohm tank:
Indirect Inhalation Sub Ohm Tank Known As Mtl (Mouth To Lung):
Indirect inhalation sub-ohm tanks are known for vapers who want a tight, cigarette-like draw. Indirect inhalation takes place in 2 stages. First, it is necessary to suck the steam to bring it into the mouth, and a second time inhales steam to make it into the lungs.