Many Netgear users nowadays are fed up of the difficulties that they face while performing Netgear Nighthawk setup. Even when it is ensured that the correct web address is being entered, they somehow still get stuck with the brain-hindering issues of routerlogin.net. Unfortunately, if you are among those users, then don’t worry because we’ve got you covered.
Here, we’ll guide you in setting up your WiFi router with a better approach in comparison to the Manual method; by using the Netgear Nighthawk App.
Using the Netgear Nighthawk application is one of the easiest ways to install your router and access the internet. This app operates both on Android and iOS devices. So, regardless of what mobile device you use, you’ll easily be able to set up your home router.
To install your Netgear router using the Nighthawk app, here are the step-by-step instructions that you need to follow:
Netgear Nighthawk Setup Using the Nighthawk App
-
Unbox your Netgear WiFi router with utmost care.
-
Make sure that no part of the Nighthawk router gets damaged.
-
Next, if provided, attach the antennas.
-
Connect your modem to the router using a cable.
-
Not sure about how to connect the WiFi devices? Well, connect one end of the cable into the modem and another into the router.
Note: There is no compulsion that you need to use a cable to connect your router and modem. You can make use of a wireless source too.
-
Press the Power button on the router and wait until the LED light becomes solid green.
-
As soon as the power LED turns green, unlock your mobile device.
-
In the case of an Android, go to the Google Play Store and if you have an iOS device, then go to the App Store to download the Nighthawk app.
-
Wait patiently for a minute or two for the Netgear Nighthawk app to get installed.
-
Once the app gets installed, create a Netgear account by filling in the required details.
-
Now, follow the on-screen instructions to finish performing Nighthawk router setup.
By following the aforementioned steps, you’ll surely be able to set up your WiFi device with ease. But on the off chance if you get stuck at some point, then follow the troubleshooting tips outlined below:
Troubleshooting Netgear Nighthawk Setup Issues
-
If you’re using a wire to connect your router and modem, then ensure that it is free of damages. The reason being, a worn-out cable can cause issues that don’t even exist in the first place.
-
If the power LED light doesn’t turn solid green, it means that there’s something fishy with the wall socket. Examine it once. If the socket is working just fine, then performing a simple restart of your router is enough to get rid of the technical glitch.
-
Your mobile device should be fully charged at all costs. Discharging of the battery will force you to perform the Netgear Nighthawk setup from scratch.
We hope that these troubleshooting steps were enough for you to get rid of the Netgear router setup issues. In case of further assistance, feel free to get in touch with us through the comments section below.