canon pixma ts5320 printer is a compact, colorful multifunction printer that is easy to set up and even easier to use. PIXMA TS5320 is very suitable for printing documents and photos, including square images, especially from smartphones. The printer can be set up using wireless technology in a matter of minutes. Connect 1 and use the Canon PRINT2 application to start printing immediately. PIXMA TS5320 both interesting and useful. It has a 2-cartridge FINE mixed ink system for easy ink replacement. Its new design has a 1.44-inch OLED screen and a built-in status bar to quickly check the status of the PIXMA Wireless3 TS5320. This is a multifunctional printer that can be easily customized your various printing needs.
Here, below we have mentioned the steps that you need to carry out to set up the Canon PIXMA TS5320 printer. The whole setup process is divided into two parts:-
Part 1: Start Easy Wireless Connect on Your Canon Printer Device
Press the Wireless button to connect before you see processing appearing on the screen.
Part 2: Download and Run your Setup File
- • Run the installation file and select the start installation option.
- • A notice about network security will appear on the screen. Read this notice and click Next.
- • Read all agreements and click “Yes” to continue. If you choose No, the installation process will end.
- • The information request is then displayed on the screen. You can choose between the options “Accept” or “Reject”.
- • If you select “If you disagree”, a message will be displayed on the screen, informing you that you cannot receive messages about Canon products over the Internet.
- • Then click Yes to confirm the connection method.
- • Depending on your network settings, a network selection screen will be displayed. Make sure to select a 2.4 GHz network.
- • After the connection is established, click Next.
- • Click Next again.
- • If you want to download and install other software, please click the “Continue Online” button.
How to Connect Canon TS5320 printer to WI-FI?
Before connecting the canon Pixma printer to a Wi-Fi network that your printer should have a WPS push button. Follow the simple steps to set up a canon pix ma printer to a wireless network.
- • You have turned on the printer.
- • On the printer control panel, press and hold the Wi-Fi button until the indicator light flashes.
- • After the indicator flashes blue, go to the access point and press the WPS button.
- • While searching the network, the blue Wi-Fi indicator on the printer continues to flash.
- • After the printer is successfully connected to the wireless network, the Wi-Fi indicator light stays on.
- • To test the printer, put paper in the printer and test printing.
windows 10 undoing changes made to your computer
SETUP CANON PIXMA TS5320 TO ROUTER
If we set our radio channel to “Auto” on your router, please try to change it and see if it solves the problem. Users reported that changing the radio channel from automatic to manual helped resolve this issue.
• Each router has its process. Access to the radio channel interface; however, most routers can be accessed from the “Settings”> “Wireless”> “Advanced Settings” page. Click on the option called “Wireless Channel” drop-down menu from it and set it to 1, 6, or 11.
• Turn on the printer power.
• Control panel: To operate the printer, press and hold the Wi-F button until the indicator light flashes.
- After the indicator flashes blue, go to the access point and press the WPS button.
- When you browse the network, the blue Wi-Fi indicator on the printer continues to flash.
- When printing is successful, the Wi-Fi indicator will turn on and off. Connect to the wireless network. To test the printer, load paper in the printer and test the pressure.
Other Solutions to Try:
- • To connect the printer to the router, the 2.4 GHz SSID must be enabled with a different SSID on the router because the wireless printer is only connected to the 2.4 GHz frequency band.
- • Make sure that at least 5 are installed on the printer and router.
- • Use HP printer and Scan Doctor. It is a diagnostic tool for Windows computers that can be used to scan and repair printer problems.
- • Turn on the printer.
- • On the printer control panel, press and hold the Wi-Fi button until the indicator light flashes.
- • After the indicator flashes blue, enter the access point and press the WPS button.
- • While searching for the network, the blue WLAN indicator on the printer continues to flash.
- • After the printer is successfully connected to the wireless network, the Waif light will remain stable. • Make sure that the printer is loading paper into the printer and test printing.
