Have you been facing issues while trying to log into your Netgear WiFi router? If yes, fret not! You’ve landed on the right page looking for a solution. Here, you’ll find every troubleshooting tip required in order to resolve the routerlogin.net not working issue. So, with no further discussion, scroll down, and read on.
Note: In case you get stuck at any point while trying to fix the issue at hand, feel free to take the help of our technical experts. All you need to do is, simply drop your query in the comments section below. Our experts will get back to you shortly.
Troubleshooting: Netgear Routerlogin.net Not Working Issue
Tip 1. Check the Hardware
Most of the time users face the Netgear routerlogin.net not working issue because of a faulty hardware. Chances are that you’re facing the issue due to the same reason. But, worry not. Checking the hardware of your device will resolve the issue.
Mentioned below are the points that you need to consider while checking the hardware:
- Make sure that your wall socket is in working condition.
- The power cable connecting your router to the modem shouldn’t have any cuts.
- Your router should be receiving an adequate power supply.
- The power LED light on your router should be stable.
Tip 2. Have a Strong Internet Connection
One of the major reasons why you aren’t able to log into your router is because of a weak internet connection. To fix this issue, make sure that your Netgear router is well connected to the existing modem.
If you’ve connected your WiFi devices using a damaged Ethernet cable, then we suggest you to connect your devices wirelessly instead. On the offchance the issue persists, then waste no time in contacting your Internet Service Provider (ISP). There is a possibility that the internet issue is from their end.
Tip 3. Enter the Correct Web Address
Usually, users face the Netgear routerlogin.net not working issue because they forget to be careful while entering the default web address. If you’ve been making the same mistake, then ensure that you’re careful while entering the web address next time.
If being careful doesn’t work in your favor, then it’s probably because you’re using an outdated web browser. To fix the issue, keep your web browser uptodate. If required, alsoclear the cache, cookies, and browsing history of your web browser.
Tip 4. Use the Default IP Address
Still unable to access the routerlogin.net web page?
Well, perhaps, you should forget about using the default web address for routerlogin. Instead, give 192.168.1.1 a try. 192.168.1.1 is the default IP address of your WiFi router.
Note:The default router login IP varies from router to router. Thus, cross-check the IP address of your WiFi router by referring to the Netgear manual. In case you aren’t able to figure out the default IP of your router, get in touch with our technical experts.
Tip 5. Update the Firmware
Another thing that you can do to get rid of the routerlogin.net not working issue is to update the firmware of your WiFi device. Not sure about how to do that? Worry not! Walk through the step-by-step guidelines mentioned below and know how to update the firmware of your Netgear WiFi router:
- Connect your WiFi router to the existing modem with a cable.
- Log into your device by using the default router login Netgear details.
- Go to the Settings option.
- Click on the Firmware Update button under the Administration option.
- Now, give your router some time to get updated.
By following these troubleshooting tips, you’ll surely be able to get rid of the Netgear routerlogin.net not working issue. On the off chance, if the issue persists, don’t hesitate to reach out to our highly experienced technical experts.