Being an electronic device, Netgear extenders are also prone to technical glitches. Thousands of Netgear users have reported various issues related to their extenders. Netgear extender keeps rebooting is one of them.
Rebooting is the first solution that users opt to resolve most Netgear extender issues. But, rebooting itself is an issue here. What to do now? Keep reading this article to know what to do if your extender keeps rebooting.
Why Your Netgear Extender Keeps Rebooting?
Here are the most common reasons that cause your extender to reboot:
- An outdated firmware of your Netgear extender.
- Your extender might not be receiving a fluctuation-free power supply.
- Chances are that your extender might be placed at the wrong location.
Now that you are aware of the reasons why your Netgear extender keeps rebooting. Let’s discuss the troubleshooting tips to fix this issue.
Fixed: My Netgear Extender Keeps Rebooting
Basic Troubleshooting Tips
Follow these basic troubleshooting tips that may help in resolving the issue:
- Check the Power Outlet
Make sure that you have connected your extender to a working wall socket. For this, you can check the status of the Power LED on your extender. If it does not stabilize, plug your extender into another wall socket and check if the issue resolves.
To prevent your Netgear extender from power outages, use a UPS.
- Prevent Overheating of Your Extender
Sometimes, the extender gets overheated due to its excessive usage. Another reason behind overheating of the extender is that you might have placed it in a closed area. Therefore, it is recommended to place the extender in a ventilated area.
- Relocate Your Extender
If you have placed your extender at too much distance from the router, it will become difficult for both devices to establish contact. As a result, your extender will keep rebooting. Therefore, relocate your extender and refer to the following points while doing so:
- Place your extender and router nearby each other.
- Don’t place your extender close to any reflexive objects like mirrors and fish tanks.
- Keep devices like microwave ovens, refrigerators, Bluetooth speakers, baby monitors, etc. at a distance from the extender.
If the basic troubleshooting tips fail to resolve the issue for you, then move to the advanced troubleshooting tips mentioned below:
Advanced Troubleshooting Tips
- Update the Firmware
If your extender still keeps rebooting, then you might be running it on an outdated firmware. An outdated firmware prevents the Netgear extender to function properly. Therefore, update the firmware of your extender to its latest version as soon as possible.
You can update the firmware of your extender either by accessing the 192.168.1.250 default IP or via the Netgear Nighthawk app.
- Reset and Reconfigure
If updating the firmware is unable to fix the issue, then it is time to restore your extender to factory default settings. But, before resetting your extender, make sure to back up its data by accessing the mywifiext.net login page, so that you don’t have to face hassle during Netgear extender setup. Here are the steps to reset your extender:
- Turn on your extender by connecting it to a working wall outlet.
- Locate the Reset button on the extender.
- Once found, press the Reset button with the help of a paper clip or needle.
- As soon as you release the Reset button, your extender will will get restored to the default mode.
- Now, perform Netgear extender setup by accessing the login page.
Final Words
This was all about what to do if your extender keeps rebooting. If you are unable to resolve the issue with the aforementioned troubleshooting tips, chances are that your extender is damaged. Therefore, replace it with a new one and perform Netgear extender setup.