If your silver jewelry is not in good condition, there are many ways to give the shine back to your silver. These methods will teach you how to polish silver quickly and effectively. There are many methods to polish sterling silver, but you should choose the one you love the best. Let’s take a look at some of the ways.
This is a preventive measure. It is easy to polish silver jewelry, especially if using a silver polishing cloth, which can be purchased at a very affordable price from Amazon. Just dry the surface, then apply the white vinegar. Be gentle not to scratch the surface. Rinse the white vinegar off with warm water.
Secondly, gently remove the whitish deposits that have built up on the sterling silver chain using gentle dish soap. For this, you may require two tablespoons of dish soap mixed in a bowl. Put the bowl over a bowl of hot water and stir until the soap is dissolved thoroughly. Now, rinse off the soap.
The third step is to add a few drops of black vinegar to a small dish of water. Mix in the white vinegar. Stir well. Let the mixture stand for five minutes. After the mixture has sat for five minutes, dip a cotton cloth in baking soda. The vinegar mixture will coat the fabric. After that, wipe off any tarnish with the fabric.
Fourthly, to prevent tarnishing, you should apply a little petroleum jelly. Gently rub on the belly in a circular motion. It will prevent tarnish from building up. Once the oil is used, gently wipe it off. Repeat the process until the chain sparkles.
Fifthly, if there is already a layer of tarnish on the metal, you can use a solution of one part of white vinegar and two parts of mild detergent. Mix the solution and dip a cotton cloth into it. Let the fabric soak for half an hour and rinse with warm water. Then, rinse once again and repeat the entire cleaning process until the tarnish is removed completely. Once the tarnish is removed, re-soak the cloth for about an hour before you use it.
The last step in removing tarnish is using a silver polish remover. Mix the desired quantity of silver cleaner with warm water. You can then rub it on the tarnished spot and leave it until the solution becomes dark red. Once it becomes red, rinse with clean water. To make sure that you remove all traces of the cleaner, you may repeat this process until the cloth turns white.
Those are the five simple steps on how to remove tarnish from sterling silver. There are now several commercial products available in the market, including baking soda, liquid detergent, salt, and ammonia. However, the best and most effective way to deal with tarnished silver is still maintaining a good cleaning regimen, often overlooked by jewelry makers and consumers.
Regular cleaning can help remove tarnish from sterling silver, reduce tarnish buildup, and extend the lifetime of your investment. However, some cleaning agents have been known to discolor silver quickly. This happens when the cleaning agent reacts with the natural properties found in the metal. Other chemicals or liquids can also have a negative impact on your investment. They can leave streaks and stains, significantly changing the original luster of the metal. So, before you invest your hard-earned money, be sure to choose a cleaning product that is gentle enough to avoid any damage to your precious metal.
If you are dealing with severe tarnish, you may resort to professional cleaning services. However, this may be more costly than doing it yourself. Professional jewelers have access to specialized cleaning equipment, which makes the job much easier and faster. Moreover, some polishes are more potent than others. When choosing a polish, make sure that you choose one that does not produce a shiny sheen, as silver becomes dull if it is polished.
If you cannot find a commercial cleaner that is gentle enough to clean silver, try using a mixture of warm water and a small amount of rubbing alcohol. After mixing the two, apply them to your cloth and wipe your jewelry dry. You may also consider using hand sanitizer as an alternative to water. However, keep in mind that you should never saturate the cloth with the sanitizer while using hand sanitizer as this can damage the metal.