Grease a valve sounds like a relatively easy task. But the truth is that nobody was born with that kind of engineering knowledge.
That’s why we’ve written down this quick and simple guide on how to grease a gas valve. This information can also be used to find out how to grease a low torque valve or even grease a plug valve.
That means that no matter what valves you’re working with, our guide should help you grease it up properly.
Use the Right Lubricants For the Job
The first thing you need to remember when proper valve greasing is using the best lubricants for the job. Not all lubricants are born equal, so make sure you do your research before you purchase.
Making sure you invest in quality lubrication is important no matter which sector you’re working in. All machines need to be greased and oiled with the right lubricants if you want them to work as intended.
You should make sure to purchase lubricants that have been specially designed for whatever valve you’re working with. That way, you can ensure you’re using a quality product that’ll grease your valve properly.
You can follow this link to find out about high-quality lubricants for various sectors and uses.
How to Grease a Valve
Now that you’ve purchased the right lubricants, you need to know how to actually grease your chosen valve.
Different valves will require different approaches. So you’ll first need to do your research on your machinery itself, as well as other specifications.
Once you know what you’re working with, you can squeeze your chosen lubricant into the valve itself. You should inject a suitable amount of grease into the valve itself, but make sure not to overdo it.
Too little grease will mean that your valve isn’t going to turn properly. But too much can clog the valve up and means your efforts have been a waste of time. This is also known as over-greasing.
Once you’ve squeezed your lubricant into the valve, you should check for any leakage. This is again caused by adding too much grease, which can happen.
If there is seepage, make sure to give the valve a small turn at the green valve stem. Around an eighth or a quarter should do it. This tightens the valve up, which makes sure that the lubricant won’t escape from the valve.
Make sure to twist the valve a couple of times to ensure that the grease has been properly inserted. Once you’ve done this, you’ve successfully greased your valve.
Where Can I Find Out More?
You should now know exactly how to greasing a valve. Always remember to first purchase high-quality lubricant, and also make sure to research what kind of valve you’re working with before you start.
If you’d like to find out more about other relevant topics, make sure to read through some previous posts on our website.