Tyres are an indispensable part of cars. We can’t even think of our drives to be safe and secure without them. Those who live in places with extreme temperatures, understand this even better as they need to keep two sets of tyres with the – winter and summer tyres. That means, they need to get their tyres changed twice a year. While it’s a good thing to keep tyres according to seasons, it can become a cumbersome process to get them changed twice a year.
What’s worse is that at the beginning of every season, there are long queues in the garages and that’s what makes it exasperating for most of us. This is the time you just wish if you knew how you could change your motorcycle tyres Leek. Well, if this is what you think, then this blog is perfect for you. Let us know some steps regarding this.
Tools required for tyre changing
There are some tools that you need for changing your own tyres. You need a car jack, cross wrench, torque wrench and some other tools which you’ll need to complete the process.
Jack
This is the first thing that you’ll need to change your tyres. Jacks come in various sizes each having its own features. These jacks have different capacities to bear the load. If you have a jack that can carry load up to two tonnes of load. These jacks can be lifted only to a particular height.
Cross wrench
You need this wrench to loosen and tighten the nuts later again. Make sure that the wrench fits the nuts on the wheels. Check this practice when you go to buy them.
Torque wrench
This is an extremely important instrument required in changing tyres. This helps in tightening the nut bolts accurately. This ultimately helps in getting the grip of the wheel right.
Wire brush
This is used in removing the dirt and grime from the hub of the wheel.
A pencil with grease
When you store your tyres, it’s important to mark them correctly, so that you fit them to the right position. Mark them as left or right according to the positions. Don’t forget to mention front or rear as well.
Gloves
This is last, but not least. You always need a comfortable pair of gloves to change your tyres Leek.
Steps for tyre changing
- First, put the car into first gear and pull up the handbrake.
- Use the cross wrench and loosen all the nuts and bolts in the wheel.
- Now comes the use of a jack. Position it in such a manner so that your tyre is above the ground at a safe distance to change it. Check your vehicle manual for the position of the jack.
- Remove all the bolts using a cross wrench. Once the wheel comes off the hub, use the grease pencil to make a mark.
- Next, use the wire brush to remove the wrench. Now is the time to put on the wheel.
- You need to fit the wheel bolts again. You can again tighten them using a cross wrench. However, they can be tightened only lightly.
- Get your car close to the ground so that the tyre touches the surface.
- With the help of a torque wrench, tighten the bolts. Just ensure that you do this in a crisscross pattern.
- Finally remove the jack and repeat the same process for the other tyres of the vehicle.
Once you get the knack of it, you’ll realize that tyre changing is not that strenuous at all. Follow the instructions decorously and you won’t face any issues in this.